Back to Projects

Case Study · Heritage Gates & Estate Access

The South Oxfordshire Courtyard Gate

Opening a substantial historic flint boundary wall for pedestrian estate access — a two-metre aperture cut through knapped flint, a 200kg wrought-iron gate hung on a custom Purdy Gates steel post, and reclaimed handmade brick columns tied back into the historic fabric with sympathetic lime mortar.

South Oxfordshire April–May 200kg wrought-iron gate by Purdy Gates of Woodcote

The Project

Opening a historic wall, carefully

It's been a joy to work with the client on this commission in South Oxfordshire. The task was to open a two-metre-wide aperture through a substantial traditional knapped flint boundary wall to provide pedestrian access into a historic vernacular barn courtyard — while preserving the character and structural integrity of the surrounding masonry.

The work began by punching the opening through the flint, then cutting out an intractable 1960s concrete farm-yard barrier that had been poured directly against the historic footings. Sub-base foundations were prepared for a custom heavy-duty steel hanging post fabricated by Purdy Gates of Woodcote to carry the 200kg wrought-iron gate. Flanking brick columns were then built from reclaimed handmade bricks to match the existing brickwork, with sympathetic flint infill and lime mortar repairs tying the new opening back into the historic fabric.

"It's been a joy to work with the client on this job in South Oxfordshire. Now the courtyard can be accessed via the new reclaimed pedestrian gate."

— Andrew Jarvis, Chiltern Woodcraft

Project Specifications

Location
South Oxfordshire
Wall type
Knapped flint
Aperture
2 metres wide
Gate
200 kg wrought-iron

by Purdy Gates of Woodcote

Brickwork
Reclaimed handmade

Process & Execution

The courtyard gate, phase by phase

From punching the first hole through the flint wall to hanging the completed wrought-iron gate — a chronological record of opening a historic boundary wall for pedestrian estate access while preserving its character.

01Flint Wall Aperture6 May

Phase 1: Aperture Cleaned & Courtyard Access Opened

It's been a joy to work with the client on this job in South Oxfordshire. We started by punching a hole through the flint wall and cutting the 1960s concrete plinth, followed by the installation of the steel hanging post. Brick columns were then built using reclaimed hand made bricks to match the existing brick work with sympathetic flint and lime mortar repairs to match. Now the courtyard can be accessed via the new/ reclaimed pedestrian gate.

Stage three: cleaning back the ragged flint jambs, sorting and stockpiling sound flint for re-use, and establishing clear line and level through the aperture into the historic vernacular barn complex behind.

South Oxfordshire

02Flint Aperture & Demolition14 April

Phase 2: Punching 2-Metre Opening & Cutting 1960s Concrete Plinth

Day one was to punch a two metre wide hole through the flint wall. Day two was to start cutting out the hideous 1960s concrete farm yard lower barrier at the base of the wall. This has proved to be incredibly hard cement and not much fun. Moving forward, a steel post will be installed made by Purdy Gates of Woodcote, to hang the 200kg gate on before brick pillars are built and walls repaired.

Stage one of the courtyard gate opening: carefully dismantling a two-metre aperture through traditional flint masonry and mechanically excising an intractable 1960s concrete farm barrier poured directly against the historic footings. Setting sub-base foundations for the custom heavy-duty steel post fabricated by Purdy Gates of Woodcote to hang the 200kg gate.

South Oxfordshire

03Concrete Cutting & Footings14 April

Phase 3: Cutting Out Concrete Plinth & Preparing Sub-Base Footings

Day one was to punch a two metre wide hole through the flint wall. Day two was to start cutting out the hideous 1960s concrete farm yard lower barrier at the base of the wall. This has proved to be incredibly hard cement and not much fun. Moving forward, a steel post will be installed made by Purdy Gates of Woodcote, to hang the 200kg gate on before brick pillars are built and walls repaired.

Excavating the concrete farm barrier with heavy masonry saws and breakers, clearing the threshold between the courtyard and lane, and preparing the structural ground footings to receive the Purdy Gates steel post and reclaimed brick pier foundations.

South Oxfordshire

04Groundwork & Clearance6 May

Phase 4: Site Clearance & Sub-Base Preparation

Clearing out masonry rubble, exposing the original wall footings and excavating the courtyard base ready for steel hanging post foundations and lime mortar brick piers.

Meticulous clearing and barrowing of displaced flint and rubble cores, preserving historic building materials on site for reuse in the flanking column repairs and infill. Exposing the original wall footings and leveling the threshold to receive structural steel foundations.

South Oxfordshire

05Brickwork & Lime Mortar6 May

Phase 5: Reclaimed Brick Column Construction & Gate Fitting

Building brick columns using reclaimed handmade bricks to match the existing brickwork, hanging the ornate wrought-iron pedestrian gate and completing sympathetic flint and lime mortar repairs.

Constructing the masonry column using authentic reclaimed handmade bricks laid in traditional breathable lime mortar, carefully tying the new work back into the historic flint matrix. The heavy ornamental wrought-iron gate was hung and calibrated on the new steel post beneath protective workshop awnings.

South Oxfordshire

06Restoration Complete6 May

Phase 6: Completed Pedestrian Gate, Brick Piers & Flint Integration

Completed pedestrian gate project in South Oxfordshire. Reclaimed handmade brick columns, sympathetic flint and lime mortar repairs, and the beautiful wrought-iron gate granting courtyard access.

Completed courtyard pedestrian access: handsome reclaimed handmade brick columns with weathered copings, expertly matched flint infill bedded in breathable lime mortar, steel hanging post and the restored ornamental wrought-iron gate opening the historic courtyard to the surrounding estate.

South Oxfordshire

Conservation ethos

Reclaimed materials, sympathetic repair

Reclaimed handmade bricks

Brick columns built from reclaimed handmade bricks laid in traditional breathable lime mortar, carefully matched to the existing historic brickwork courses and copings.

Sympathetic flint & lime

Knapped flint infill bedded in breathable lime mortar to tie the new aperture opening back into the surrounding historic flint matrix — matching colour, coursing, and joint profile.

Purdy Gates steel post

A custom heavy-duty steel hanging post fabricated by Purdy Gates of Woodcote, engineered to carry the 200kg wrought-iron pedestrian gate with structural integrity for decades to come.

Visit Purdy Gates
Chat on WhatsApp