Back to Projects

Case Study · Oak & Timber Framing

The Oxfordshire Oak Framed Roof

A traditional oak framed roof with a hipped end built in Oxfordshire using scribe-rule joinery — from establishing datum points and levelling wall plates through to a completed vaulted French boxed heartwood oak ceiling with integrated rooflights and lime-plastered panels, all hand-scribed and pegged.

Oxfordshire October–January French boxed heartwood oak with scribe-rule joinery

The Project

Scribe-rule joinery, from crash floor to vaulted ceiling

This Oxfordshire commission called for a traditional oak framed roof with a hipped end, built to remain permanently exposed internally as a vaulted architectural centerpiece. Work began by establishing a single datum point from which all subsequent measurements were taken, then squaring and levelling the perimeter wall plates before inspecting the air-dried structural timbers — paying particular attention to the fissures, whose length and character speak to the seasoning and integrity of the oak.

The tie beam, ridge beam and king post were laid out on the crash floor in their correct orientation ready for scribing and cutting. Each joint — the compound angle where jack rafters meet the heavy oak hip rafter, the king strut to the ridge, the eaves purlin to the wall plate — was hand-scribed and hand-chisel-finished before fixing, with traditional mortise-and-tenon joints secured by oak draw-pegs. The roof structure itself was built using French boxed heartwood oak, and the completed vault integrates twin rooflights and lime-plastered ceiling panels between the exposed rafters and purlins.

"All timbers will be exposed internally, so every joint required tolerance-free traditional scribing and hand chisel finishing before fixing — built to stand for decades."

— Andrew Jarvis, Chiltern Woodcraft

Project Specifications

Location
Oxfordshire
Frame
Air-dried oak
Method
Scribe rule
Roof
Hipped end
Ceiling
French boxed heartwood
Finish
Lime plaster

Process & Execution

The oak roof, phase by phase

From the first datum point and inspection of the air-dried oak through to the completed vaulted French boxed heartwood ceiling — a chronological record of a scribe-rule oak framed roof with a hipped end.

01Oak Framing & Carpentry14 October

Oak Framed Roof with Hipped End: Timber Inspection & Datum Points

Work has started on our latest project, building an oak framed roof with hipped end. First task was to establish a datum point where all measurements can be taken from, then squaring and levelling wall plates. Finally we were ready to inspect the air dried timbers delivered for quality (particularly inspecting the fissures for their length/size). Tie beam, Ridge beam and King post are now laid out on the crash floor in their correct orientation ready for scribing and cutting.

A comprehensive traditional oak framed roof project featuring a hipped end. Initial works involved establishing datum lines for full geometric accuracy, squaring and levelling all perimeter wall plates, and rigorous quality inspection of air-dried structural oak members. The tie beam, ridge beam, and king post were positioned on the crash floor for traditional scribe-rule joinery layout before joint cutting.

Oxfordshire

02Traditional Carpentry8 November

Oak Frame Roof: Jack Rafters & Hip Rafter Precision Joinery

A selection of joint cuts on the jack rafters joining the hip rafter on the oak frame roof Chiltern Woodcraft built recently. All timbers will be exposed internally so we will show you updates once the roofers and plasterer have visited. Lovely clients to work for.

Close-up craftsmanship showing compound angle joint cutting where the jack rafters meet the heavy oak hip rafter. Because the timber framework remains permanently exposed internally within the vaulted living space, each joint required tolerance-free traditional scribing and hand chisel finishing before fixing.

Oxfordshire

03Exposed Oak Framing1 January

French Boxed Heartwood Oak Roof: Ridge & King Strut Vault Detailing

Nice to get some internal photos of the roof chilternwoodcraft recently built, with the crash deck now removed. Roof structure was made using French boxed heartwood oak. Now to hand over to the kitchen fitters.

Vertical perspective showing the central ridge, king strut, and inclined rafters framed in French boxed heartwood oak. The precision mortise-and-tenon joints with traditional oak draw-pegs are highlighted against breathable lime-plastered ceiling panels.

Oxfordshire

04Rooflight Detailing1 January

French Boxed Heartwood Oak Roof: Integrated Glazed Rooflights & Purlins

Nice to get some internal photos of the roof chilternwoodcraft recently built, with the crash deck now removed. Roof structure was made using French boxed heartwood oak. Now to hand over to the kitchen fitters.

Looking up into the twin rooflight wells built directly into the French boxed heartwood oak framing. The trimmed rafters and kerfed headers bring substantial natural light deep into the vaulted kitchen space while preserving the structural honesty of the exposed timber.

Oxfordshire

05Timber Framing Trim1 January

French Boxed Heartwood Oak Roof: Eaves Purlin & Window Trim Framing

Nice to get some internal photos of the roof chilternwoodcraft recently built, with the crash deck now removed. Roof structure was made using French boxed heartwood oak. Now to hand over to the kitchen fitters.

Detail of the lower eaves framing where the boxed heartwood oak wall plate meets horizontal trim timbers and aperture reveals, highlighting natural grain character, shrinkage checking, and authentic edge chamfers.

Oxfordshire

06Completed Vaulted Ceiling1 January

French Boxed Heartwood Oak Roof: Wide Angle Vaulted Kitchen Perspective

Nice to get some internal photos of the roof chilternwoodcraft recently built, with the crash deck now removed. Roof structure was made using French boxed heartwood oak. Now to hand over to the kitchen fitters.

Full room perspective of the completed vaulted kitchen interior following crash deck removal. The symmetrical French boxed heartwood oak rafters, purlins, and twin rooflights create a bright, spacious vaulted architectural centerpiece ready for kitchen installation.

Oxfordshire

07Compound Joinery1 January

French Boxed Heartwood Oak Roof: Hip & Valley Rafter Intersection

Nice to get some internal photos of the roof chilternwoodcraft recently built, with the crash deck now removed. Roof structure was made using French boxed heartwood oak. Now to hand over to the kitchen fitters.

Scribed hip rafter intersection meeting ceiling rafters at compound pitch angles in French boxed heartwood oak. Demonstrating traditional hand scribing and tight timber-to-timber contact throughout the hip geometry.

Oxfordshire

Conservation ethos

Traditional scribe rule, air-dried oak

Scribe-rule joinery

Every joint hand-scribed from the crash floor — the traditional English method for fitting wonky, irregular timbers together — then hand-chisel-finished before fixing with oak draw-pegs.

Air-dried structural oak

Datum points established, wall plates squared and levelled, and air-dried timbers rigorously inspected for fissure length and seasoning integrity before the tie beam, ridge and king post were laid out.

French boxed heartwood

The completed vault built in French boxed heartwood oak with integrated twin rooflights and lime-plastered ceiling panels between the exposed rafters and purlins — delivered ready for the kitchen fitters.

Chat on WhatsApp